Boron is added to steels to increase hardenability, substituting of more expensive elements. Moreover, B acts as a recrystallization delaying element when it is in solid solution. However, B can interact with N and/or C to form nitrides and carbides at high temperatures, limiting its effect on both phase transformation and recrystallization. On the other hand, other elements like Nb and Ti are added due to the retarding effect that they exert on the austenite softening processes, which results in pancaked austenite grains and refined room microstructures. In B steels, Nb and Ti are also used to prevent B precipitation. However, the complex interaction between these elements and its effect on the austenite microstructure evolution during hot working has not been investigated in detail. The present work is focused on the effect the B exerts on recrystallization when added to microalloyed steels. Although B on its own leads to retarded static recrystallization kinetics, when Nb is added a large delay in the static recrystallization times is observed in the 1273 K to 1373 K (1000 A degrees C to 1100 A degrees C) temperature range. The effect is larger than that predicted by a model developed for Nb-microalloyed steels, which is attributed to a synergistic effect of both elements. However, this effect is not so prominent for Nb-Ti-B steels. The complex effect of the composition on recrystallization kinetics is explained as a competition between the solute drag and precipitation pinning phenomena. The effect of the microalloying elements is quantified, and a new model for the predictions of recrystallization kinetics that accounts for the B and Nb+B synergetic effects is proposed.