ARTÍCULO

Effect of water matrix on photocatalytic degradation and general kinetic modeling

Autores: Rioja, N.; Zorita, S.; Peñas Esteban, Francisco Javier (Autor de correspondencia)
Título de la revista: APPLIED CATALYSIS B-ENVIRONMENTAL
ISSN: 0926-3373
Volumen: 180
Páginas: 330 - 335
Fecha de publicación: 2016
Resumen:
Photocatalysis employing TiO2 nanoparticles was studied to assess the effect of aqueous matrix nature in the degradation of clofibric acid (CFA) under UV-A radiation. Aeroxide TiO2-P25 at 0.50 g/L was the most effective catalyst among those tested, with a CFA degradation of 98.5% after 15 min. The CFA photodegradation in environmental waters (tap, mineral, river and recycled wastewater) and in the presence of inorganic (NaCl, FeCl3, FeCl2, AlCl3, CaCl2, Al2(SO4)3, Fe2(SO4)3, Na2SO4, NaHCO3, and Na2CO3) and organic compounds (humic acids, and a surfactant) commonly found in real waters was compared to that obtained in pure water. In general, the removal efficiency decreased with inorganic salts, especially with sulfates and carbonates (>70% deactivation), and also in environmental waters (>90%). A general kinetic model has been developed to describe the CFA photodegradation depending on the type and concentration of substances present in water. The first-order kinetic constants were estimated by defining a characteristic parameter for each ion species tested in the aqueous matrix. High correlation (R2 > 0.99 in most cases) was observed between experimental CFA concentrations and those predicted by the model.