Resumen:
Purpose - This paper aims to focus on the design, analysis and additive manufacturing (AM) with two different technologies of an accelerator pedal for the Formula Student 2014 edition to reduce the weight of the original pedal in aluminium and maintain a reasonable level of performance. Design/methodology/approach - The new and the original accelerator pedals were modelled in a computer-aided design application, and three finite element simulations were performed for each manufacturing technology to evaluate three different driving scenarios. Later on, two physical prototypes were manufactured using two AM technologies: poly-jet and fused deposition modelling (FDM). With these physical prototypes, static tests were carried out to verify the computational simulations and to determine the fracture load, while dynamic tests, based on an input signal from a real racing scenario, were performed to ensure their technical viability. Findings - Simulations with poly-jet and FDM printing material show that the new design presents a maximum deformation of 4.8 and 4.09 mm, respectively, under a nominal load of 150N. The results of the static tests with the poly-jet physical prototype showed a maximum displacement of 4.05 mm under a nominal load of 150N, while the ultimate load before fracture was 450N. The FDM prototype reached 3.98 mm under 150N and the ultimate load was 350N. Dynamic tests showed that both pedals were able to withstand four Formula Student "Endurance" events without failure. Originality/value - This paper states that AM approach is a feasible and economically affordable solution in comparison to exiting solutions with metallic alloys and composite materials when designing and manufacturing accelerator pedal arms for Formula Student competition cars. According to these results, the present research argues that, from a technical point of view, the AM pedals stand at a reasonable level of performance in displacements and stresses. This study suggests that AM pedals could be a viable option that must be considered in professional competitive automobiles.
